100G ống COPASLIP chống-kẹt/ASS COMP - Copaslip (Molyslip chống-kẹt Compounds and Greases)

COPASLIP™ is a high-performance compound specifically formulated to protect fasteners from seizure induced by extremes of temperature, pressure and corrosion. The semi-synthetic base fluid is reinforced with anti-oxidants, corrosion inhibitors and ultra-pure copper particles to provide outstanding protection to threads and components.

COPASLIP™ minimises variations in frictional interference between threads, allowing accurate and consistent assembly. It also prevents galling and seizure during assembly and dismantling – even after long periods of exposure to high temperatures, corrosive environments or high pressure.

PACKAGING

100g tube, 400ml aerosol, 500g tin, 5kg and 20kg pail

TECHNICAL DATA (TYPICAL VALUES)

 

Property	Result
Consistency	NLGI 1
Base oil viscosity	100 cSt
Drop point	>300°C (non-melting)
Flash point (IP34)	>200°C
Effective temperature range	-40°C up to +1100°C
Solidification point (of the base fluid)	-20°C
Coefficient of friction (steel on steel, steady state)	0.12

When a compound is applied to a threaded fastener that will be tightened to a specific torque setting, the torque setting will require adjustment to allow for the lubricating effect of the compound. Failure to do so can result in incorrect tension in the fastener.

Correct torque settings can be calculated using the tables and charts below and the standard thread equation:

T = KDP
T = Torque (N.m), D = Diameter (m), P = Clamping force (N), K = Nut factor

Material	K Nut factor
8.8 Steel self-coloured	0.14
8.8 Steel BZP	0.10
8.8 Steel hot-dip galvanised	0.14
A2 Stainless steel	0.13
Brass	0.12