Danh mục sản phẩm
Bôi trơn tự động 1 điểm MEMOLUB ONE
BÔI TRƠN TỰ ĐỘNG MEMOLUB ONE

Memolub® ONE
MEMOLUB® ONE
MEMOLUB® ONE is a single point autonomous refillable lubricator
Its ejection pressure of 10 Bar opens a wide new range of application not accessible with conventional lubricators
Remotely installed, it can be used up to two meters from the lube point
Dòng sản phẩm Áp Suất 10 Bar: bôi trơn 1 điểm lắp tại vị trí bôi trơn hoặc có thể lắp từ xa đến 2 m.

Phù hợp cho ứng dụng máy chạy liên tục và cần bôi trơn liên tục với lượng nhỏ.
Đặc biệt phù hợp cho các ứng dụng cần số lượng chất bôi trơn ít hoặc rất ít nhưng tần số bôi trơn thường xuyên, liên tục: những bạc đạn nhỏ, thanh trượt dẫn hướng, xích, động cơ điện nhỏ và vừa…
MÔ TẢ SẢN PHẨM:
- Áp lực: 10 Bar, lắp xa được 2m.
- Thể tích chứa chất bôi trơn: 240cc, dùng nguồn Pin 4.5V.
- Chất bôi trơn: Dầu hoặc Mỡ bôi trơn (lên đến NLGI 2 và 1500 cSt).
- Nhiệt độ làm việc: -15 °C – 50 °C.
- Cài đặt: 4 điểm cài đặt chuẩn (hết hộp mỡ trong 1, 3, 6 và 12 tháng).
- Tích hợp: cấp độ bảo vệ IP66, chuẩn chống cháy nổ ATEX: II 3D/Ex tc IIIC T85°C IP66 Dc / II 3G/Ex Nc IIB T6 Gc.
- Xuất xứ: Vương Quốc Bỉ-EU
- Bảo hành: 2 năm.

TRỌN BỘ BAO GỒM:
- Bộ Memolub ONE.
- Hộp mỡ 240cc.
- Bộ Pin 4.5V.
- Fitting/bộ chuyển đổi ren Fitting vặn vô vú mỡ.
- Gá đỡ 1 điểm (nếu lắp từ xa).
- Ống châm sẵn mỡ (nếu lắp từ xa).
- Hộp rỗng để chứa dầu, Chổi quét, Gá đỡ chổi quét và Van 1 chiều (nếu bôi trơn bằng dầu).
- Hình lắp đặt như hình minh họa.

ƯU ĐIỂM VÀ LỢI ÍCH CỦA SẢN PHẨM:
- Áp suất 10 Bar nên lắp xa được 2m, thiết kế tối ưu với hộp mỡ nằm trên nên mỡ không bị tách lớp.
- Tích hợp: cấp độ bảo vệ IP66, chuẩn chống cháy nổ ATEX: II 3D/Ex tc IIIC T85°C IP66 Dc / II 3G/Ex Nc IIB T6 Gc.
- Xuất xứ: Vương Quốc Bỉ-EU, bảo hành: 2 năm
- Sản phẩm, phụ tùng và phụ kiện luôn có sẵn
- Hỗ trợ kỹ thuật: khảo sát, tính toán lượng mỡ bôi trơn tối ưu, đưa ra giải pháp bôi trơn tối ưu (đúng chất bôi trơn, đúng số lượng, đúng thời điểm), hướng dẫn cài đặt-lắp đặt, cho dung thử (nếu cần).

MEMOLUB® One
Single-Point Lubricator
- Reliable lubrication 24 hours a day, reduce equipment downtime
- Reusable pump - low cost replaceable lube cartridges
- Simple 1, 3, 6 or 12 month duration settings
- Battery powered - no wiring needed
- 3 year lubricator warranty
Part Number:
MLONE240 - MEMOLUB® ONE Model 240cc
The MEMOLUB® ONE lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
All MEMOLUB lubricators are designed with a transparent housing for quick visual inspection of the lubricant level.
| Technical Specifications | Memolub ONE |
|---|---|
| Delivery Method | Metered Quantity |
| Dimensions | 4.0" x 6.4" |
| Electrolyte Liquid | No |
| External On/Off Control | Yes |
| Feed Type | Single-Point |
| Housing Material | Polymer |
| Lubricant Cartridge Capacity | 240cc (Replaceable) |
| Lubricant Cartridge Type | Replaceable Cartridge |
| Lubricant Compatiblity | Grease ( to NLGI #2) or Oil |
| Lubricant Flow Rate | N/A |
| Mounting Thread Size | 1/4 R Male (1/4"NPTM adapter included) |
| Multi-Point Compatible | N/A |
| Operation | Electro-Mechanical - Positive Displacement Pump |
| Operating Pressure | 140psi (10 bar) |
| Operating Temperature Range 1 | Ambient Exposure: -13°F (-25°C) to 122°F (50°C), Min. working temperature: 5°F (-15°C) |
| Output timing settings | 1, 3, 6 or 12 months |
| Power Supply | 4.5Vdc Alkaline battery pack |
| Remote Installation 3 | Up to 6 feet (2 meters) |
| Reusable | Yes |
| Splitter Block Compatible 2 | N/A |
| Strokes per day | N/A |
| Warranty | 3 Years |


Simple Programming
The MEMOLUB® ONE daily lubricant output is programmed using the simple colored MEMO system. The Red, White, Green and Yellow timing MEMOs determine how long it takes to empty the lubricant cartridge.

There are four basic time settings; 1, 3, 6 and 12 month, that are suitable for a wide range a industrial applications Once the appropriate colored MEMO is installed, the program is retained in the MEMO fitting, and at the lube point, allowing the user to interchange other MEMOLUB® ONE lubricators without the worry of reprogramming.
Memolub One is Easy to Install
Grease filled lubricators come preloaded with a lubricant cartridge and battery pack for quick installation. Oil filled lubricators require installation of the lubricant cartridge and battery pack on site.

Product Resources:
EN







