ENDanh mục sản phẩm
Keo dán gioăng Three Bond Gray 8.8 Oz Tb1215
Keo tạo gioăng Threebond 1215
1. Đặc tính:
Keo gốc silicone dạng lỏng, không có dung môi, dạng dẻo, màu xám.
2. Ứng dụng:
- Dùng cho cạnh ghép nối và ốc vít tạo thành miếng đệm chống sự rò rỉ chất lỏng: nước, dầu nhớt, xăng, gas và hóa chất.
- Làm kín xilanh, block máy, hộp số
- Chịu được nhiệt độ: từ -60°C đến 250°C
- Dạng đóng gói: 250g
Three Bond TB 1215 is an OEM approved single-component, solvent free and non-acid liquid gasket on RTV-Silicone basis (Room Temperature Vulcanising) with low odour. Within a very short time it forms a rubber-like highly elastic gasket completely adapted to the surface structure of the flange face. ThreeBond 1215 has been designed specifically as an automotive flange sealant with extremely high chemical resistance, for use on gear cases, oil pans and valvecovers. TB 1215 has excellent chemical resistance against gear oil with outstanding mechanical resistance against shear forces. It has excellent adhesion even to slightly polluted surfaces and is extremely fast curing. It provides an instantaneous sealing for pressure and firing test. It is sensor safe and can be used in oil pan sealing; gear case sealing; valve cover sealing and the such like.
1200 series (Silicone-based liquid adhesives and seals, potting agents)
1200 series (Silicone-based liquid adhesives and seals, potting agents)
Once cured, it forms a rubber elastic body, and it has excellent vibration absorption property as well as shock- and heat- resistance.
| Product name | Features and Uses | Appearance | Viscosity (Pa·S) | Blow out resistance (MPa room temperature) |
|---|---|---|---|---|
| TB1207B | Heat resistant and LLC resistant | Black | 100 | 10 and higher |
| TB1211 | Multipurpose silicone | White | 68 | 10 and higher |
| TB1215 | Heat resistant, oil resistant, gearoil resistant | Gray | 20 | 10 and higher |
| TB1216E | Oil resistant, LLC resistant | Gray | 200 | 10 and higher |
| TB1217F | Oil resistant, LLC resistant | Gray | 210 | 10 and higher |
| TB1217H | Initial resistance to pressure, oil resistant | Gray | 330 | 10 and higher |
| TB1217M | Oily surface adhesion, Heat resistant, oil resistant | Black | 280 | 10 and higher |
| TB1281 | Gear oil resistant, heat resistant | reddish brown | 100 | 10 and higher |
| TB1281B | AT fluid resistant, heat resistant | reddish brown | 115 | 10 and higher |
* Measurements are taken under the standard testing conditions for each grade.
